Canary Offline on Ethernet and WiFi. Support is useless 💩

My Canary cameras are 3 months ago started going offline in the app and refusing to re-connect even if powered down and restarted. My first idea was is it a WiFi issue? So I started with the basic channel adjustments as well as adjusting the positions TalkTalk hub to hopefully fix the issue but unfortunately this did not help.

My ISP contract was due to end so I switched to BT FTTC 80/20 which I get the full sync rate including the new BT Smart Hub. I experienced the exact same issues with my new ISP as with my previous ISP so next I connected as many of the Canary AIO devices by ethernet (and going into the app changing the connection to ethernet on each AIO device) assuming still this was a WiFI issue… nope even over ethernet they were still not able to connect to Canary cloud (this was being shown due to how the light on the Canary device was showing and in the app as showing offline - even unplugging the camera to restart it did not help).

What is strange that they were not going offline all at once, it would be maybe 1 or two at a time and it would be random both effecting the Flex and AIO devices. Eventually after a few hours they would re connect (ISP connection is up and running perfectly no other devices apart from the Canarys were experiencing this issue) so next I figured get rid of the BT Smart Hub and run my own equipment just incase.

So I setup a PFSense (2.4.x) firewall/router running bare metal on a Dell r210 connected to my ISP with a Draytek 130 FTTC modem and I used the Netgear ORBI AC3000 devices (4 of them placed around my hope to gain better speeds to all cameras and devices) I had full WiFi coverage with consistent stable speeds and pings all around my home. I found the speeds to be more stable and had more control over my network and connected devices, great! I figured hopefully this would solve the issue. 48 hours in I was still experiencing the exact same issues with he devices so this completely rules out it being my equipment.

To add to the ISP, I’ve had a BT Openreach engineer out to test my line from my home to the PCP and the PCP back to my home and it was “the best line he had seen in a while.” He went through everything behind my setup, configured IPv6 on the PFsense server for me to see if that would help. He did multiple checks on the speed and pings even to Phoenix, AZ which were very stable and were under 100ms which is great being in the UK. He confirmed that I have absolutely no issues my end and that it must be the manufacture at fault.

At this time I was in contact with Netgear support for them to hopefully find an issue with the ORBI devices, we tried everything from custom firmware supplied by their techs to gain more in depth logs as well as changed made to help connections for IP type cameras. This showed that the Canary devices were staying connected to WiFi and ethernet so this meant that the connection between the Canary devices and the Phoenix, AZ servers is the issue.

I made Canary aware through support who put the issue to the ORBI’s and was blaming them for the problems with no investigations, I played along and have been very patient trying everything I could in the meantime and keeping them updating on what changes were being made. I tried everything from the BT Smart Hub to the PFSense Dell and changing the software to OPNSense, which didn’t help either so I went back to PFSense.

I was told that they would try and setup contact between me and the “engineers” but as this is not something that is regularly done, it might not happen. Four weeks later I’ve been told that the issue is with the ORBI’s (even though proving that it isn’t anything on my side) and that Canary would no longer be providing support to me for this issue. What a joke.

I’ve jumped through hoops, whilst spending lots of time and money trying to resolve this whilst Canary has just blamed the Orbi’s which weren’t even purchased when I first started experiencing these issues.

I’m looking to replace the system ASAP as I can no longer trust Canary to provide the security that they claim on their buggy devices. I’m sorry to leave but after 2 years with Canary with a full subscription on all 7 of my cameras throughout, I’m very disappointed that the support is next to useless and are refusing to acknowledge a fault that I’m not only having (look through the community forums and do a Google Search)

I think Canary have grew too fast and don’t have the infrastructure to run all customers cameras, as they used to work great and now they’re overpriced paperweights. I wish I went with an more established competitor or setup my own local NVR.

My subscription is being cancelled and the cameras are to be binned asap. I’m hoping in the meantime of saving up for another camera system Canary will actually look into the issue but I’m not holding my breath.

If you’re reading this and considering getting a Canary device, I’d do some research before buying in on Canary as I’m not the only customer experiencing this.

I’ve had one camera offline for weeks, I’m about a week from the unit being out of warranty and customer service are just messing me around to avoid replacing it, any surprise as I cancelled my annual account???



And here I thought I was the unique snowflake…evidently this is a common problem. We used a Canary device for 2 years without a problem, except for the occasional online drop. A couple of weeks ago we were offline and haven’t been able to get back online. We’ve worked with Canary Customer Support - by that I mean they keep giving us drips and drabs of to-do lists and we keep doing the heavy lifting. Nothing is working - not using an ethernet cable, not using the yellow cable, not clearing caches, not uninstalling and reinstalling the app, nothing. We use Nest cameras and Lorex hardwired cameras outside of our house and are going to just buy a Nest indoor camera for indoors. We’ve not had a problem with Nest outdoor cameras or the Nest thermostat. We haven’t had a problem with any wifi assisted device in our house (our bed, alarm system, motorized window treatments, etc.). I don’t know what the problem was with Canary but we’re done trying to get back online. Life is short and I’m not wasting more of it struggling to get Canary to work. Best of luck to those having issues…and to Canary Customer Support.

1 Like

Been through the same thing, I gave up in the end after I was denied support after repeatedly being told I’m the only person experiencing this issues and it’s my hardware. But the amount of customers on the forums in the past few weeks that have come forward with similar or the same issues (such as yourself) shows that this is a wider spread problem.

They use AWS (Amazon Web Services) for most of their camera network, I only know this because I have been monitoring packets and states on my PFSense firewall looking for issues between the cameras my network and WAN. I noticed a lot of issues with they AWS packets coming through and states only dropping for their connection to the Canary cameras (again showing the issue is on there end) I did make Canary aware but no response.

But I find it funny that after blaming me and my equipment it was their AWS instance configuration that is not working as it should be and still isn’t.

I’m in the process of moving over the Unifi Video with my own local server for reliability I could not get with Canary. The few Flex cameras I have still are not connecting and I’ve noticed their “desktop streaming” through the web browser has been down for over a week now with an internal 500 error.

I’ve personally had these issues for nearly 4 months now with no real help from Canary which is why I’m in the process of leaving.

I discourage any new customers joining at this point as the system does not work half as well as it should, it’s a shame because when it was working it was a great working system but now it’s become next to useless. Such a shame.

My Canary PRO has been down since start of September and no amount of support has been able to fix the issue - including multiple resets, removing the 5g network for wifi and direct connection via ethernet cable. It looks like I am going to have to find another company additional monitoring.

I’ve come here with an identical issue. I only have two Canary Pro cameras but I noticed a couple of days ago that one of them is Offline. No amount of resetting, swapping from WiFi to Ethernet etc. has made a difference.

I opened a Support Ticket on Friday morning and await a response. Given the comments here I think it may be time to look for an alternative.

Same thing here. One question at a time hoping you will go away. Flex completely dead and under warranty and they are dragging it out hoping I give up, Horrible support!

Hello @MotoChooch,

Thanks for bringing this to our attention. I’ll reach out via a DM so we can gather more information and help resolve the issues you are encountering.

If anyone else in this thread is still experiencing issues as well, please don’t hesitate to let me know and I can make sure it gets addressed.


To those that are having wireless issues I believe I found my culprit.

Your access point may have an option to disable 2G Data Rate Control. Try this. It stopped my wireless devices from disconnecting. My hard lined Canary that was having issues was unrelated and also was resolved for me. If your AP has options to auto optimize disable that as well. These devices are very sensitive it appears. Since I’ve made those changes 2 weeks ago I have not had any of my devices go offline.

I have deleted my original post because it was not an issue with the devices itself. I do think maybe Canary can look into this and update the firmware to not make these changes necessary however. Hopefully this works for others as it did for me.